dAHLer Valve Controller

for BMW, M & Hybrid Models

dAHLer Valve Controller

The dAHLer Valve Controller for BMW and BMW M cars was developed in Switzerland and manufactured in Germany and is a must have if you like to control the sound of your car.

dÄHLer Valve Controller Black Edition Flap BMW BMW M3 M4 G80 X5 M50i M60i X3M X3 X4 M40i G42 G87 M2 M340i M440i M5 X5M

How does it work?

With the dAHLer Valve Controller installed you can manually open and close the standard built-in exhaust valve of your BMW at any time. It operates at the push of a button on the in delivery included remote control or can be programmed to your mirror buttons, so the system will be very well integrated.

Installation of the dAHLer Valve Controller in your BMW is easy and can be carried out by anyone with a little manual skill. The device is a direct plug in to the existing (OEM) harness. You pull out the original plug and connect it to the socket. The other plug is then connected to the socket on the exhaust flap and the connection is done.

The complete installation takes place in the trunk and under-body. You look for a cable duct or unused sealing plug that leads from the inside to the outside. Power supply comes directly from the original plugs and there is no need to lay cables through the interior of the vehicle.

With our smart Valve Controller Module, one cannot close the exhaust flap permanently. This is for safety reasons as when driving at full throttle with the exhaust valve closed it could damage the engine in a long term.

Memory Mode

Memory function programmable via remote control

You can use the remote control to activate the memory function and the device always remembers the last driver’s setting even after an engine stop (OPEN or STOCK).

If BMW updates the computer software, the dAHLer Valve Controller Module is not lost or overwritten.

As our Valve Controller Module operates as minimally in the vehicle as necessary, it does not does not leave an error message. When your car goes to the BMW workshop for maintenance, no errors appear on the DIS machine.

The dAHLer Valve Controller Module for BMW is undetectable to plug-in diagnostic readers and it leaves no traces behind

Our Module for your BMW vehicles are here to improve your driving experience with an awesome sound.

The system has been checked and is it not causing any damage to your vehicle. Each of our systems is individually checked for function after assembly and subjected to quality assurance. All Modules are made in Germany by a team of specialists at an ISO 9001:2015 certified facility.

Our device is built to be safe from the ground up, so that it cannot interfere with the data bus.

The Module is permanently resistant from up -30° to +80° C (-22° to 176° F). As a rule, you don’t need any additional heat protection.

Features - Valve Controller

– Works with all BMW F & G series
– Opens the exhaust flap 100%
– Better sound at your fingertips
– Controlling of the exhaust valves via remote control
– Programmable memory function, saves the last selected setting
– Compatible with BMW mirror buttons
– No extra power cable required
– Quick Plug & Play Installation
– Compatible with all BMW driving modes
– Not VIN locked, can be removed without a trace and resold down the road
– Made in Germany
– Worldwide 2-year product warranty

Safety of your engine

No 100% closing of the valves to protect the engine from overheating.

With the dAHLer Valve Controller all of the factory safeguards of your BMW remain in place, including overload protection and warm-up protocols to preserve longevity and factory drive-ability. One of the amazing advantages of this type of system is that it is unaffected by factory BMW updates and service.

If BMW updates the computer software, our Valve Controller is not lost or overwritten. This is just another key aspect of our module because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained.

The Valve Controller Module is undetectable to plug-in diagnostic readers and it leaves no traces behind.

All dAHLer Exhaust Flap Modules for BMW cars were thoroughly evaluated on the street, track and unrestricted German Autobahn. Each Controller is manufactured in Germany at an ISO 9001:2015 certified facility to fulfill the highest safety standards.

CHECK PRICING